DURABLE, QUALITY PRODUCTS

Dalco has been Colorado’s leading concrete accessory supplier for over three decades, focusing on products that “go in, on, or around concrete.”

With over 2000 products in stock, we can can meet your job site needs for cures, patches, vapor barrier, epoxies, ADA pavers, trench drains, formliner, waterstops, grouts, forming products, insulation, column tubes, silicone, poly, stair treads, and more.

Dalco only works with the uppermost manufacturers in the industry, so our customers are assured of receiving the most durable, skillfully crafted, and highly engineered products available.

Denver Colorado Concrete Accessories

CONCRETE ACCESSORIES PRODUCT LISTING

Grout- GP Grout

Join, support and anchor. GP Grout is designed to provide high flexural and compressive strength performance from stiff to fluid consistencies. Hardens free of bleeding, segregation and shrinkage. Good performance and economical. 50 lb bags, in stock at Dalco.

Bonding Agent J-40

Dayton Superior’s J-40 Day-Chem Ad Bond is a superior bonding agent consisting of acrylic latex emulsion. It is mainly used for bonding new to new or old to new concrete in exterior or interior applications. J-40 is extremely effective when it is used as an admixture with cementitious products such as patching compounds, coatings, and grouts. As an admixture, J-40 not only promotes a strong bond but also greatly increases the strength, durability, and resistance to moisture of the finished product. It is available in one gallon jugs and five gallon pails.

Castings

Dalco/Teton carries a large inventory of manhole rings and covers and RL channels. The standard 24” ring and cover is in-stock along with the 5, 10 and 15 foot lengths of RL channels. Less-common sizes are available, please call for availability. Each casting can be specified for heavy to light duty, and can include wording that is called for by various DOT agencies or municipalities.

Dalco/Teton carries a large inventory of manhole rings and covers and RL channels. The standard 24” ring and cover is in-stock along with the 5, 10 and 15 foot lengths of RL channels. Less-common sizes are available, please call for availability. Each casting can be specified for heavy to light duty, and can include wording that is called for by various DOT agencies or municipalities.

Concrete Curing Blanket

Why bother with the hassle of renting concrete blankets when Dalco sells them at a low cost every day? There is no time and labor spent on cleaning, refolding, and returning the blankets after just a single use. After two uses, Dalco’s blankets have already paid for themselves (in comparison to renting.) All blankets are 12′ x 25′, available with an R value of 8.02 or 10. Each blanket is rigidly constructed to withstand the rigors of the average western winter. Ask about large quantity discounts.

Cure & Seal- Safe Cure & Seal J-18

Due to the fact it is devoid of noxious flammable fumes that typically emanate from solvent based cures, Safe Cure & Seal or J-18, is perfectly suited for interior applications. These properties lend to J-18 being a much safer alternative to solvent cures that emit a robust odor and are highly flammable. J-18 is a water-based styrene and acrylic copolymer that is not only a cure, but also a seal and dustproofer for newly poured concrete. Resistant to many chemicals, J-18 also works with standard carpet and tile adhesives. Available in 5 gal. or 55 gal. units.

Cure & Seal- J-20 UV

J-20 effectively cures, seals and dustproofs fresh interior or exterior concrete surfaces. When applied properly, J-20 forms a clear film that will resist many chemicals, assist in protecting against stains, and promotes simple removal or mortar droppings. J-20 contains 25% solids and meets ASTM C-309. It can be applied between temperatures of 90 to 35 degrees Farenheit. This particular product was reconfigurated under VOC laws to meet the current standards. Standard packaging is 5 gallon pails and 55 gallon drums.

Cure- Clear J-11-W

Dayton Superior J-11-W is a resin- based clear curing compounds for use on freshly finished horizontal and vertical concrete surfaces. It requires no mixing and can be applied with a low power sprayer, roller, or brush. One gallon will cover approximately 200 square feet, drying in about 2 hours. Dalco/Teton has J-11-W available in five gallon pails and 55 gallon drums. It meets the ASTM C- 309 Type I, Class B standards.

Cure- Davis Colorseal II for Colored Concrete

The standard gray, drab color of concrete is not exactly the most attractive shade to live with on a daily basis. Colored concrete can be used to transform ordinary concrete structures into an enhanced look that brings out the life of driveways, patios, walkways, paths or other exterior and interior applications. Dalco has in-stock, everyday, Davis Colorseal II, a curing and sealing compound for new and old colored concrete. Ordinary water-based curing compound and plastic curing sheets can discolor the slab. Davis Colorseal II will not only improve the color of the concrete, but also protect the slab to prevent cracking and promote final hardness. By applying Colorseal II every year or so on old concrete slabs, it will help renew the color appearance and continue to protect it as well. Colorseal II is semi-transparent and tinted in 40 different shades. Dalco carries the entire Davis color chart, either in-stock or just a few days away.

Cure- White, Wax Based

US SPEC MaxCure Wax White is a white, wax-based cure that was designed to meet or exceed VOC restrictions. It cleans up without the use of messy and costly solvents, only simple water clean-up is required. MaxCure is recommended where high reflectance of sunlight is desired for temperature reduction of concrete. It is available in 5, 55 and 275 gallon quantities.

Curing Blankets- UltraCure

The superior water retention ability of UltraCure-NCF allows the blanket to absorb more than 41 gallons of curing water per 1,600 sq. ft. roll, providing the critical moisture required for the long term wet curing of concrete surfaces. With typical application and proper installation, the superior absorbency demonstrated by UltraCure NCF means there’s no need to re-wet the slab.

Curelap Curing Blanket

Curelap Blankets are a combination of 10 oz. burlap and 5 mil white opaque poly. The 5 mil polyethylene is extruded onto the 10-ounce burlap. The result is a lightweight summer curing blanket that can be used over and over again. The burlap layer distributes the water evenly over the covered surface, while the white opaque poly reflects the intense rays of the sun. The blankets are ideal for use on silica fume overlays and parking structure decks, and can be used effectively on any concrete structure.

Epoxy Grout

Five Star DP Epoxy Grout is the only expansive, nonshrink, low exotherm epoxy system for machinery grouting. This versatile, dual-purpose product is formulated for single, large volume placements. It’s a three component, 100% solids, solvent-free system formualted to provide high strength and superior creep resistance combined with the highest effective bearing area.

Epoxy- Resi-Bond J-58

Resi-Bond is a 100% solids, high modulus, high strength epoxy bonding adhesive. It is a two component, moisture-insensitive structural epoxy adhesive that meets ASTM C-881. It is ideal for bonding fresh concrete to hardened concrete and for bonding steel to fresh or hardened concrete and for bonding steel to fresh or hardened concrete. Resi-Bond can also be used for anchoring bolts, dowels and reinforcing steel into concrete where a pourable consistency is required.

Epoxy- Sure Anchor J-51

Sure-Anchor J-51 is a 100% solids, high modulus, high strength adhesive. However, J-51 is a thick, “peanut butter” consistency. It is perfectly suited for anchoring bolts, dowels, and rebar into concrete as well as vertical and horizontal structural bonding and patching. It can also be utilized to seal unsightly cracks and set injection ports. Both J-51 and J-58 are available in cartridges for easy gun application and in larger gallon units. Contact your Dalco rep to see how much of either product your specific project will require.

Evaporative Retarder/Finishing Aid J-74

Sure Film, or J-74, is a evaporative retardant/finishing aid for concrete. J-74 helps to create dense, high quality concrete by reducing the evaporation of moisture from the concrete surface during the finishing process. Shrinkage cracking will be reduced when J-74 is used in less than suitable conditions (i.e. hot, dry, windy, humid) because of reduction of moisture that allows more time for proper finishing. It will have no detrimental effect on strength or durability. Sure Film is equivalent to the generic term used in the industry for evaporative retarder or finishing aid, Confilm.

Floor Underlayment

Dayton Superior Levelayer II is a self- leveling, non-shrinking floor underlayment. It can be used on new construction projects to correct rough or unfinished concrete and to level out uneven floors. Levelayer II can cover 50 square feet at 1/8″ per 50 pound bag. However, it can be applied at any thickness from a featheredge to 4″. Normal foot traffic is acceptable after 3-4 hours. Use J-42 primer in conjunction with Levelayer II.

Foam Insulation- Pactiv Polystyrene

Amofoam (aka Pactiv GreenGuard) extruded polystyrene foam insulation board is designed to help preserve the integrity of masonry and concrete wall systems and give contractors confidence that the sidewall system will perform over the long term. Each 4′ x 8′ sheet’s high density, closed cell structure provides inherent moisture resistance. It is designed to maintain a high R-value and compressive strength, and will not deteriorate over time, protecting the overall wall system from long-term damage. Each sheet is available in several different thicknesses, lightweight, easy to install, and available in scored style- “snapped” into three smaller portions.

Grout- 1107 Advantage

1107 Grout is a non-shrink, non-corrosive, non-metallic grout. It offers the advantages of pumpability and heat and thermal shock resistance, while providing a controlled, net expansion. 1107 is designed for interior and exterior grouting of precast concrete components, structural column base plates, pump and machinery bases, anchoring bolts, rebars, dowels, bearing pads, keyway joints, and crane rails.

Grout- Epoxy Grout by Five Star

Five Star DP Epoxy Grout is the only expansive, nonshrink, low exotherm epoxy system for machinery grouting. This versatile, dual-purpose product is formulated for single, large volume placements. It’s a three component, 100% solids, solvent-free system formualted to provide high strength and superior creep resistance combined with the highest effective bearing area.

Grout- Five Star

Five Star Grout is the industry’s leading cement-based, nonmetallic, non-shrink grout for supporting machinery and equipment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star® Grout exhibits positive expansion. Five Star® Grout meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40°F – 90°F (4°C – 32°C).

Grout- GP Grout

Join, support and anchor. GP Grout is designed to provide high flexural and compressive strength performance from stiff to fluid consistencies. Hardens free of bleeding, segregation and shrinkage. Good performance and economical. 50 lb bags, in stock at Dalco.

Grout – MP Grout

US Spec MP Grout is designed to provide high flexural and compressive strength performance from damp pack to fluid consistencies. Hardens free of bleeding, segregation and shrinkage. Excellent flowability.

Grout- Sure Grip Dri-Pak

Sure-Grip Dri-Pak Grout is a high performance, ready-to- use, non-shrink, non-corrosive, non-mettallic grout that is specifically formulated for dry packing applications. Dri- Pak’s special formula is created to produce high density and a high compressive strength. It achieves a strength of 4,200 psi in one day, which helps speed up construction time. Dri-Pak contains no chlorides or any substance which could cause corrosion, rusting, or bleeding.

Grout- Sure-Grip High Performance

Sure-Grip High Performance Grout is a, non-shrink, non- corrosive, non-metallic grout that is ready-to-use. It can be used for the same applications as the 1107 grout, but but is specifically designed to deliver a high rate of flow with excellent density and a high compressive strength. Sure-Grip delivers 5,000 psi in one day and provides an effective load bearing surface through its non-shrink properties. These properties make it ideal for dynamic loads. Sure-Grip contains no chlorides or any substance which could cause corrosion, rusting, or bleeding.

Joint Sealant- Sonneborn NP-1

NP-1 is a one-component high- performance gun-grade moisture-curing polyurethane sealant designed for a wide range of sealing and caulking applications in active exterior joints. NP 1 requires no mixing and typically bonds to many materials without a primer, including concrete and masonry. It is available in “sausage” pro-packs 20 ounce cartridges and 10 ounce cartridges.

Joint Sealant- Sonneborn NP-2

NP-2 is a two-component gun-grade polyurethane sealant that produces a flexible long-lasting seal. NP 2 bonds to most common construction materials without a primer. It has been successfully tested for a joint movement of plus or minus 50% according with ASTM C 719.

Joint Sealant- SL-2

SL-2 is a two-component polyurethane sealant that is mixed and poured in place. When cured, it forms a tough, resilient joint seal that resists penetration, abrasion, and remains flexible through exposure to weather and aging. SL 2 is available in both self-leveling and slope-grade versions. It can be color matched to any substrate.

Joint Sealant Tape – Willseal

This pre-compressed, self-expanding polyurethane foam joint sealant is designed to seal against weather, moisture, vapor, sound, draft, and dust. Unlike other sealant methods, Willseal will not react to joint movements and strain, surface contamination, aging, and general tensile stress-caused failures. It will not dry out, shrink, or deteriorate over time. There is no masking, painting, mixing, nor staining. Basically, there is no mess. Contact your Dalco or Teton rep to see which type of Willseal is best for your particular application.

Parking Guards and Splash Blocks

Dalco provides precast parking blocks and splash blocks to help finish up the job. Heavy duty, durable concrete units are available. Parking guards come with rebar stakes for secure placement.

Patch- Five Star EZ Cure

Five Star EZ-Cure Repair Mortar is a fast turnaround, fiber reinforced, single component, high-performance cementitious repair mortar for horizontal or formed vertical repairs. It requires no wet cure or curing compounds and may be extended with coarse aggregate to make a fast setting concrete for deeper placements. Five Star EZ-Cure Repair Mortar is a versatile, high early strength product which provides a durable long term repair.

Patch- HD-50

Dayton Superior’s HD-50 is a rapid-setting flowable patch, latex-modified, fiber reinforced, and fast setting. It is designed for horizontal areas where high strength and fast setting are required to minimize downtime. Areas repaired with HD-50 can be open just outside of an hour due to the compressive strength of the patch. HD-50 is ideal for the repair of highways, bridges, runways, warehouse floors, loading docks and parking structures.

Patch- Polyfast FS

Dayton Superior Polyfast FS is a high strength mortar containing Portland cement, special polymers and additives to provide an outstanding strength gain along with a fast set. It contains a a built-in acrylic bonding agent that helps give it a “putty-like” consistency. This property makes Polyfast FS perfect for vertical and overhead applications. One 50 pound bag results in a .42 cubic foot yield.

Patch- Re-Crete 20 Minute Set

Re-Crete is an easy to use patch that does not contain a bonding agent. It is an economical alternative to patching applications, whether they be vertical or overhead. Re-Crete sets fast in 15 minutes and yields 1/2 cubic foot per 50 pound bag. Simple use for step repair, quick sidewalk work, or miscellaneous work.

Patch- Thin Resurfacer

Dayton Superior Thin Resurfacer is the ideal patching and resurfacing compound for thin applications (feather edge to 1/2″.) Ideally suited for the repair of rain damaged new concrete or badly spalled older surfaces, Thin Resurfacer requires only the addition of water. It sets faster than normal concrete, whereas the surface can be open to foot traffic in 6-7 hours.

Patch- 3-2-1 by US Spec

3-2-1 is designed to provide a smooth, textured patching material for thin surface repairs, coating and restoration applications. 3-2-1 exhibits superior workability by maintaining a smooth, creamy consistency for easy troweling, rubbing or spreading. 3-2-1 has superior bond strength to the substrate and contains no gypsum.

Patch- Transpatch

Transpatch provides rapid repair of horizontal concrete surfaces. This product is designed to achieve a high early strength and is open to traffic in as little as 1 hour. Transpatch offers superior resistance to de-icing salts, petroleum products and other chemicals prevalent on concrete roadways. In addition, Transpatch will not rust or corrode reinforcing steel under moist, humid conditions. CDOT approved.

Silicone Sealant

Sika Silicone Sealant is a uniquely formulated low modulus sealant produced for sealing joints in portland cement concrete pavements. The sealant is supplied as a ready-to-use, one component, self-leveling or non-sag, moisture curing system which provides a lasting and flexible seal. Sika Silicone Sealant offers outstanding weathering resistance and remains flexible down to temperatures as low as -50°F. The sealant bonds strongly to portland cement joints without the use of primers. Sika Silicone Sealant is applied to pavement joints using a bulk dispensing system. Available in 52 gallon drums, 5 gallon pails, and quart tubes. CDOT and WYDOT approved.

Vapor Barrier- 10 mil Stego

Stego Industries Stego Wrap is a high strength vapor barrier and is in demand by contractors and engineers throughout the world. Stego Wrap goes as far to control radon gas. It is resistant to the soil’s chemicals and solvents to provide a safer environment for the forthcoming building or structure. Stego’s “dare to tear” mantra serves true, as the distinctive yellow colored material is impossible to rip. Now in stock is the Class A style, which is being speced more and more. Available in 14′ X 110′ rolls in the 10 mil style.

Vapor Barrier – 15 mil Stego

Stego Industries 15 mil vapor barrier is the toughest vapor barrier in the industry, hands down. It exceeds every ASTM Standard that is set forth for underslab vapor barriers. Permeance, puncture resistance, tensile strength; all are set at the highest levels to provide the ultimate level of protection. Stego provides “life of the building” protection and is easy to install on the job site. While older vapor barriers bill themselves as “vapor retarders,” Stego is the only true “vapor BARRIER” that provides the utmost resistance to soil chemicals and pollutants.

Waterproofing Damproofing- Hydrocide 600

Hydrocide 600 is cold-applied emulsified water-based asphalt dampproofing and vapor-retarding coatings used on “green” or slightly damp surfaces. Use Hydrocide 600 on interior surfaces above grade and on exterior surfaces below grade.

Waterproofing Masonry Coating Seal Coat

Seal Coat 1000 by Dayton Superior is a waterproof, cement base, extra stength masonry coating which halts water penetration and damage. It is available in white or gray and can be used in exterior or interior applications, above or below grade on all types of masonry. For example, use Seal Coat to waterproof a basement, water reservoirs, concrete or stucco. It provides a smooth and uniform surface to any masonry surface. Available in a 55 lb. bag.

Waterproofing Slurry

Vandex Super is a cementitious product providing in-depth waterproofing and protection of new or old structurally sound concrete. It is produced from rapid-hardening portland cement, specially treated quartz sand, and a compound of active chemicals. It does not provide a decorative finish. Vandex Super is fairly easy to use,simply mix with water and spray on. It will sealand post shrinkage cracks up to 3 mm. It is ideally suited for water tanks, sewer applications, swimming pools, and foundations.

Bonding Agent

Dayton Superior’s J-40 Day-Chem Ad Bond is a superior bonding agent consisting of acrylic latex emulsion. It is mainly used for bonding new to new or old to new concrete in exterior or interior applications. J-40 is extremely effective when it is used as an admixture with cementitious products such as patching compounds, coatings, and grouts. As an admixture, J-40 not only promotes a strong bond but also greatly increases the strength, durability, and resistance to moisture of the finished product. It is available in one gallon jugs and five gallon pails.

Bridge Products

Dalco/Teton has a full line of engineered bridge products, including bearing devices, bridge drains, expansion devices, engineered forming hardware, a rental fleet of overhang brackets and engineered overhang hangers. Please call for availability and pricing.

Clear Cure

Dayton Superior J-11-W and US SPEC MaxCure Resin Clear are resin- based clear curing compounds for use on freshly finished horizontal and vertical concrete surfaces. It requires no mixing and can be applied with a low power sprayer, roller, or brush. One gallon will cover approximately 200 square feet, drying in about 2 hours. Dalco/Teton has J-11-W and MaxCure are available in five gallon pails and 55 gallon drums. Both meet the ASTM C- 309 Type I, Class B standards.

Column Tubes

Dalco’s stock column tubes range from 8″ diameter all the way up to 60″. They are ideally suited for piers, foundations, stacks, floors and culverts. For a nominal fee, Dalco will cut the tubes to any length. Each tube is rigidly constructed and lined and coated for structural integrity.

Concrete Vibrators

Dalco and Teton represent some of the industry’s easiest to use and most reliable concrete vibrators. Different styles available include the high cycle, flexible shaft, pneumatic, and universal. High cycle is self- explanatory, the 180 Hz frequency maximizes the efficiency of the three- phase low induction electric motor located within the vibrator head. It is ideal for low slump concrete. The flexible shaft vibrators are portable and designed for general construction, while the pneumatic vibrators favor mass concrete pours. Of course, the universal serves as a tool for the entire gamut of pours. Call your sales rep to see which one is ideal for you!

Evaporative Retarder/Finishing Aid

Sure Film, or J-74, is an evaporative retardant/finishing aid for concrete. J-74 helps to create dense, high quality concrete by reducing the evaporation of moisture from the concrete surface during the finishing process. Shrinkage cracking will be reduced when J-74 is used in less than suitable conditions (i.e. hot, dry, windy, humid) because of reduction of moisture that allows more time for proper finishing. It will have no detrimental effect on strength or durability. Sure Film is equivalent to the generic term used in the industry for evaporative retarder or finishing aid, Confilm.

Fiber Expansion Joint

Dalco’s stock expansion joint is a proprietary wood fiber blend of treated wood fibers and additives, which in turn produce a durable, yet light board. Both stronger and lighter than other expansion filler, it is easy to install, will not snap while handling, and can be easily held in position while pouring. It is perfectly suited for a wide spectrum of masonry projects and architectural applications, including sidewalks, ramps, parking lots, retaining walls, curbs, and gutters. Available in ten-foot lengths, it can be cut to any width or bought by the full sheet. Thickness varies from the ultra-thin 1/4″ to the bulky 1″. Meets ASTM D 1751.

Form Liner

Dalco/Teton offers elastomeric formliners (up to 100 uses) that are the answer to your poured-in-place, tilt- up, or pre-cast construction needs. A wide array of contemporary patterns as well as custom designs are available. Easy to install and easy to strip, these formliners come in single, medium re-use, and heavy re-use. Repeat patterns eliminate seam lines. Dalco/Teton also carries the related supplies and materials to complement Dayton Superior formliners. Call your Dalco/Teton sales rep for additional form liner information, including our complete form liner guide.

Form Release Clean Strip C & M

Dayton Superior Clean Strip C & M is an economical, yet effective premium form release. Clean Strip C & M is a petroleum based release that insures a clean release on plywood, fiberglass, aluminum, steel and other concrete forming materials. It acts as a barrier to the adhesion of concrete while minimizing surface dusting. When applied properly, Clean Strip C & M will not stain concrete or interfere with the adhesion of coatings. It is available in 55 gallon and 5 gallon pails.

Form Release No. 7

US SPEC No. 7 Release is a chemically neutral form release. It is water insoluble, containing no waxes or silicones. The advantage of a chemically inactive form release is that it will not transmit to the form, leaving unsightly stains, voids, and other imperfections. Additionally, this form release will not hamper the adhesive qualities of future coatings that are applied to the concrete substrate. No. 7 release effectively waterproofs wood and rustproofs metal. Available in 5 gal pails and 55 gal drums.

J-20 UV Cure and Seal

J-20 effectively cures, seals and dustproofs fresh interior or exterior concrete surfaces. It is a acrylic copolymer containing 25% solids. It works on fresly finished interior or exterior concrete surfaces. It meets ASTM C-309 standards, will resist many chemicals, and with it’s UV designation, help resist yellowing.

Jahn and Camlock Brackets

Dalco and Teton have both Dayton Superior and Gates brackets. Available for rental or for purchase, both systems are effective and easy to install. Please call for quantity discounts and availability.

Plywood – Forming

Dalco offers plywood for forming or miscellaneous use. Please call for more information. HDO, MDO, or BBOES all available.

Rustification Strips

Dalco and Teton can make any shapes out of various types of materials. Polystyrene, wood, and steel are among the candidates. Please call for pricing and availability.

Safe J-18 Cure & Seal

Due to the fact it is devoid of noxious flammable fumes that typically emanate from solvent based cures, Safe Cure & Seal or J-18, is perfectly suited for interior applications. These properties lend to J-18 being a much safer alternative to solvent cures that emit a robust odor and are highly flammable. J-18 is a water-based styrene and acrylic copolymer that is not only a cure, but also a seal and dustproofer for newly poured concrete. Resistant to many chemicals, J-18 also works with standard carpet and tile adhesives. Available in 5 gal. or 55 gal. units.

Safe Seal J-24

Safe Seal is a water based acrylic sealer containing 15% solids by weight. Safe Seal can be used to seal, dustproof and enhance the look of concrete and other related surfaces. It is ideal for interior applications because of low odor and non- flammability. Safe Seal produces a durable, breathable film that has a built-in resistance that withstands many common chemicals.

Screed Key, Load Key

The use of Screed/Load Key is more economical than simple bulk-headed forms which must be prepared, installed, stripped, cleaned, repaired or replaced, and stored. By using the screed or load key you will have a floor that is ready for covering without expensive joint filling or treatment. Each joint is constructed out of 24 gauge galvanized steel with 1 1/8” dowel knockouts 6” on centers. It is available in 10 foot lengths for slabs 4” to 12” thick. The corresponding stakes are made of 16 gauge x 1” steel, and should be used at all joints and 2” maximum centers.

Snap Ties

Dayton Superior Snap Ties are a staple of any concrete forming project. The A-3 Snap Tie is complete with a plastic cone to assure proper setback. The cones act as positive spreader for the forms and reduce grout leakage. Ties are available in any size, with such features as, washer end, waterstop and heavy duty applications. Our standard Snap Tie has a 13/16″ breakback. Call for pricing and availabilty.

Stayform

Stay-form is a ribbed expanded metal leave-in-place form for poured-in-place concrete. It is effective for use as forming for bulkheads, pile caps, grade beams, blindside walls, bridge applications and wherever removal of forms is difficult. Each sheet is 27″ by 97″ and a 26 gauge thickness.

Ties- Camlock System

“D” cone Camlock ties are for use with the Cam-Lock System. The one inch break back contains a self- centered tapered cone for a 13/16″ hole. Dalco and Teton stock standard sizes and handle non- standard and special varieties.

Void by VoidForm International

Voidforms are used in the construction of cast-in-place concrete foundations where expansive soils are present. Voidforms provide temporary support for cast-in-place floors, beams and walls until the concrete can support itself on the drilled piles or caissons. Over time, the corrugated paper that is used in the construction of the voidform will absorb moisture from the surrounding environment. This moisture causes the voidform to lose its structural integrity, thus allowing the soil to expand without causing damage to the foundation. Dalco carries Voidform International void, which is unique because it is constructed by simple folding, free of glues and mechanical fasteners. Voidform International also coats their void with a water-resistant wax to provide temporary protection. For long-term protection on large orders, Dalco will provide a job-site storage trailer free of charge. Void is available either assembled or “knocked down” and comes in the largest variety of sizes in the industry.

Waterstop- PVC

Dalco carries a huge variety of PVC waterstop rolls. The most basic is the flat ribbed waterstop, which is generally employed in construction joints where movement between members is not anticipated. The ribbed with center bulb style is used in expansion joints where movement is anticipated. Also available is the split ribbed or “split tail” style. This particular style is used frequently in either construction or expansion joints where elimination of split form work is feasible. Finally, there is the dumbbell style, which is very similar to the flat ribbed style. Other special shapes and styles are also available.

Waterstop- Bentonite

Waterstop-RX is a flexible strip concrete construction joint sealant that provides a permanent watertight seal by expanding upon contact with water. It is designed to replace the standard passive PVC waterstops in both hydrostatic and non-hydrostatic conditions. The unique point of the RX line is sodium bentonite, which helps forms an impermeable barrier when it comes in contact with water. This swelling causes RX to form a permanent pressure seal, thus eliminating water migration along the waterstop. The RX line includes the RX 101(3/4″x1″x 16’8″), which a cube cross-section design for vertical and horizontal reinforced concrete 8″ thick or greater. The RX 101T(1- 1/4″x1/2″x16’8″) is similar only with a trapezoidal shape. The RX 102 (3/4″x3/8″ x25′) is a half-circle design for vertical reinforced 5″ thick or greater; horizontal reinforced concrete 4″ thick or greater. All the RX products should be used in tandem with the WB-Adhesive.

Waterstop- Adeka Hydrophyllic

Dalco/Teton carries the entire family of Adeka waterstop and related products. Adeka Ultra-Seal consists of a spectally treated water-swelling rubber. When this material comes in contact with water, the hydrophyllic agent contained within swells up to provide a total block to leaks or flooding. Adeka MC-2010 is ideal for cold joints and large diameter piping penetration, or any place where traditional PVC waterstops are used in joints. The Adeka P-201 is a paste that can be utilized in a variety of applications such as piping penetrations, sheet pile interlocks, and crack repair. Dalco/Teton handles other sizes and styles of the Adeka line, please call for which one might be of most benefit for your job.

Weather Worker J-29

Weather Worker J-29 is a penetrating silane sealer that offers superior long lasting weatherproofing protection for all types of concrete and masonry surfaces. The silane composition enables deeper penetration to create a strong chemical bond in which the end result is waterproofing miles ahead or conventional coatings. Weather Worker prevents or inhibits moisture penetration, attacks by deicing salts, rust staining, and spalling caused by freeze/thaw cycles. It is available in single gallon units, five gallon pails and bulk 55 gal drums.

White, Wax Based Cure

US SPEC MaxCure Wax White is a white, wax-based cure that was designed to meet or exceed VOC restrictions. It cleans up without the use of messy and costly solvents, only simple water clean-up is required. MaxCure is recommended where high reflectance of sunlight is desired for temperature reduction of concrete. It is available in 5 gallon pails, 55 gallon drums and 275 gallon totes.

Aluminum Ladders

Need a fixed aluminum ladder to lead to a Bilco Roof Hatch? Not a problem, Dalco and Teton are proud to offer Alaco ladders. Fixed ladders or folding wall ladders are available with a variety of options, including, types for increased security, parapet options, and climbing cages. Please call your Dalco rep for additonal drawings, specs, and lead times.

Bar Guards

Dalco has a special deal available now for bags of 100 bar guards! Every job site containing reinforced steel must be equipped with bar guards. Due to a special buy, we now have a huge inventory of mushroom-style bar guards in stock. Also available are the OSHA approved square bar guards, for that hard-nosed inspector. Call for pricing while quantities last!

Ankertite – Fence Setting

Dayton Superior’s Ankertite anchoring material a cementitious product especially formulated and compounded to provide a fast, early strength anchoring material. Ankertite is an ideal product to set fence posts, sign posts, wood or metal in the ground or in concrete. Ankertite can also be used to anchor bolts, rods, machinery mounts and railings. When used in fencing, it can generally be stretched against line posts after just one hour. Other advantages are that it’s resistance to freeze and thaw cycles, very pourable, and a 4100 psi after just a single hour (6800 in one month.)

Nails

Dalco/Teton has in-stock all different types of nails. Duplex, common, and concrete nails just to name a few. Please call for availabilty and pricing.

Castings

Dalco/Teton carries a large inventory of manhole rings and covers and RL channels. The standard 24” ring and cover is in-stock along with the 5, 10 and 15 foot lengths of RL channels. Less-common sizes are available, please call for availability. Each casting can be specified for heavy to light duty, and can include wording that is called for by various DOT agencies or municipalities.

Bridge Products

Dalco/Teton has a full line of engineered bridge products, including bearing devices, bridge drains, expansion devices, engineered forming hardware, a rental fleet of overhang brackets and engineered overhang hangers. Please call for availabilty and pricing.

Site Furnishings

Dalco and Teton have most of the Division 2 site furnishings ready to adorn your outdoor jobsite. Park benches, trash receptacles, and other miscellaneous products are available in a quick turnaround time. These quality products not only brighten up any setting, but their functionality is appreciated as well. These fixtures are cratfed to withstand the typical Western Winter and strong enough to deter vandals. Call today for more info.

Anchor Bolts

Dalco and Teton carry a large selection of anchor bolts. Typical ½” x 8”, 10”, and 12” with a nut and washer are in- stock everyday, with harder to find sizes just a few days out. Longer legs and multiple nuts and washers, as well as different threads and metals types are readily available.

Jahn and Camlock Brackets

Dalco and Teton have both Dayton Superior and Gates brackets. Available for rental or for purchase, both systems are effective and easy to install. Please call for quantity discounts and availability.

Corner Guard by Arden

Surface mount corner guards can be installed in existing or new buildings in floor-to-ceiling or in custom heights. Aluminum retainers mount to the finished wall and acrylic vinyl covers snap on easily. Flush mount and fire rated corner guards are designed to give inconspicuous wall protection for floor-to-ceiling applications in new construction. Both surface mount and flush mount corner guards are available with square or radius corners. Dalco also offers Arden Architectural’s stainless steel corner guards and economy vinyl-acrylic corner guard systems.

Manhole Covers and Lids

Dalco/Teton carries a large inventory of manhole rings and covers and RL channels. The standard 24” ring and cover is in-stock along with the 5, 10 and 15 foot lengths of RL channels. Less-common sizes are available, please call for availability. Each casting can be specified for heavy to light duty, and can include wording that is called for by various DOT agencies or municipalities.

Safety Fence

Whether it’s protecting equipment, restricting site access, or marking property lines, any job site needs a healthy amount of safety fence. Dalco stocks both 50′ and 100′ foot rolls of standard orange diamond mesh fence. The highly visible orange and smooth edge make this fence tops in the crucial safety factor. Easy to install, the rolls are lightweight and long lasting. Best yet, the fence is manufactured from a tough, UV stabilized polyethylene that stands up to all of the elements.

Site Protection by Monarflex

Monarflex is the ultimate in scaffold sheeting. Made of reinforced 10mil low density polyethylene (LDPE), Monarflex has a 1500 denier scrim, making it extremely durable without sacrificing manageability and ease of use. Monarflex utilizes the patented grommet system which makes for ease of installation. Monarflex conforms to all apllicable US scaffold sheeting standards.

Concrete Curing Blanket

Why bother with the hassle of renting concrete blankets when Dalco sells them at a low cost every day? There is no time and labor spent on cleaning, refolding, and returning the blankets after just a single use. After two uses, Dalco’s blankets have already paid for themselves (in comparison to renting.) All blankets are 12′ x 25′, available with an R value of 8.02 or 10. Each blanket is rigidly constructed to withstand the rigors of the average western winter. Ask about large quantity discounts.

Geotextiles – Drainage Fabric

Typar 3401 Geotextile serves as a multipurpose nonwoven permeable separator for roads, drainage systems, erosion control applications, and in landfill drainage sytems. Typar 3401 is a Class B drainage fabric that adheres to AASHTO M288-96. Dalco/Teton offers a complete line of geotextiles and drainage fabrics that are economical, easy to install, and a sturdy alternative to traditional construction methods. Call for availability.

Tie Wire / Rebar

Dalco Industries, Inc. / Teton Steel stocks a large inventory of tie wire from 16.5 gauge to 9 gauge wire. You can place your order from one roll to one box or even by the pallet. Dalco Industries, Inc. / Teton Steel proudly sells Mar Mac brand tie wire in PVC coated or black.

Ties- Camlock System

“D” cone Camlock ties are for use with the Gates’ Cam-Lock System. The one inch break back contains a self- centered tapered cone for a 13/16″ hole. Dalco and Teton stock standard sizes and handle non- standard and special varieties.

Curelap Curing Blanket

Curelap Blankets are a combination of 10 oz. burlap and 5 mil white opaque poly. The 5 mil polyethylene is extruded onto the 10-ounce burlap. The result is a lightweight summer curing blanket that can be used over and over again. The burlap layer distributes the water evenly over the covered surface, while the white opaque poly reflects the intense rays of the sun. The blankets are ideal for use on silica fume overlays and parking structure decks, and can be used effectively on any concrete structure.

Gun Applicators

Dalco and Teton offer a variety of applicators to serve your needs. We stock astandard caulking gun, a dual cartridge gun, or a bulk applicator for mixing gallons or “sausage” pro-packs. Our staff can even figure out how much of epoxy, caulk, sealant, etc, you will need for your various applications.

Manhole Steps

Our manhole step is geared towards safety, ease-of-installation, and durability. Each step is equipped with a serrated tread and tall end lugs that prevent feet from slipping forward, backward or sideways. The step is simply hand driven into preformed holes of inserts into cured concrete. There is no need for epoxy or grout. Testing has indicated that each step can withstand loads of over 300 pounds, and even then only minor chipping and breaking occurs.

Bar Guard- Carnie Cap

The Carnie Cap System is superior to any other rebar impalement protection available today. Unlike traditional rebar caps-which provide little or no impalement protection-the Carnie Cap System, when used properly, will withstand a 250 pound weight dropped from 10 feet without the rebar protruding.

Sediment Control

Say your doing some inlet work out on the plains of Colorado. Why would you use the standard means of sediment control, the bale of hay? Excelsior Logs are a more effective means of sediment control, and as far as we know, very unappetizing to horses. Made of curled aspen wood that is enclosed in a seamless tube netting, each log provides better filtering of runoff waters. They are also extremely effective in halting check dam blowout. No more loose straw or hay from clumsy bales either. Each log is ten foot long and available in either 12” or 18” diameters.

Rebar Cutter-Bender by Willard

Any job site would be remiss without the Willard rebar cutter-bender. This portable tool easily bends and cuts up to #6 (3/4″) bar. It is the epitome of convenience! The Willard Cutter-Bender is dutifully constructed to withstand the rugged construction environment. It is mounted on a four foot board with an easy to use handle.

Silt Fence

Silt fence is an essential component to a job site to control erosion and keep materials on site. Each fence roll is 100 feet long, 3 feet high with 13 wooden stakes for easy installation. Strong and durable, as well as recyclable, Dalco/Teton silt fence is also U.V. stabilized.

Coil Rod – High Tensile

Dalco and Teton’s 1/2″ continuous coil rod is for use with coil ties, coil inserts, and coil nuts. It can be easily cut with standard bolt cutters or blades without harming the thread. Our coil rod comes in 12 foot lengths and has a working load tension of 9000 pounds. Coil nuts are also available. Additional sizes are 5/8″, 3/4″, 7/8″, 1 1/4″, and 1 1/2″. Low tensile is also available.

Geocomposite Drain

WD/15 is a sheet wall drain 10 mm thick (0.385 in.) with a high flow capacity, for use in moderate compressive strength requirements. This product is used to drain soils adjacent to foundation and retaining walls, bridge abutments, under floor slabs, and box culverts. The nodule design produces maximum flow rates, while providing optimum support and adhesive area for the geotextile fabric, and the one sided configuration minimizes potential damage to waterproofing membranes on foundation structures.

Floor Underlayment

Dayton Superior Levelayer II is a self- leveling, non-shrinking floor underlayment. It can be used on new construction projects to correct rough or unfinished concrete and to level out uneven floors. Levelayer II can cover 50 square feet at 1/8″ per 50 pound bag. However, it can be applied at any thickness from a featheredge to 4″. Normal foot traffic is acceptable after 3-4 hours. Use J-42 primer in conjunction with Levelayer II.

Backer Rod

Backer rod is placed into the joint resrvoir of expansion or contraction joints of old or new portland cement, concrete or asphalt pavement joints. Dalco’s backer rod sizes run from 1/4″ to 2″, with larger sizes available on a special order basis. All rod will not absorb water and is fairly easy to install. The closed cell polyethylene foam rod is for use with hot and cold applied sealants. It is resistant to oils, gasoline and other solvents, and will not adhere to sealant material.

RL Channeles – Inlets

Dalco/Teton carries a large inventory of manhole rings and covers and RL channels. The standard 24” ring and cover is in-stock along with the 5, 10 and 15 foot lengths of RL channels. Less-common sizes are available, please call for availability. Each casting can be specified for heavy to light duty, and can include wording that is called for by various DOT agencies or municipalities.

Polyethylene Sheeting – Poly

Dalco/Teton keeps wide selection of poly sheeting in-stock. Typically packaged in 20’ x 100’ rolls, our poly sheeting can be used for site protection, sheltering materials from the elements, underlayment, etc. our style of sheeting includes: 2 mil to 10mil, clear and black, and reinforced. We also carry string reinforced poly, which is extra heavy- duty, able to withstand the toughest construction intangibles.

Sprayers by Chapin

The Chapin 1949 Sprayer is manufactured with a thick epoxy coating that is baked on inside and out over galvanized steel for double corrosion resistance. That extra heavy-duty strength that is essential for any sprayer on a job site. It is designed with an easy use opening, great for filling, emptying, and cleaning. Additional spray tips and wands are also available. The sprayer itself has a four-gallon capacity. The brass pump is completely removable and with just a few pumps the tank is adequately pressurized. Each unit can easily be carried with the attached fabric strap.

OUR QUALITY VENDORS