Ankertite - Fence Setting

Dayton Superior’s Ankertite anchoring material a cementitious product especially formulated and compounded to provide a fast, early strength anchoring material. Ankertite is an ideal product to set fence posts, sign posts, wood or metal in the ground or in concrete. Ankertite can also be used to anchor bolts, rods, machinery mounts and railings. When used in fencing, it can generally be stretched against line posts after just one hour. Other advantages are that it’s resistance to freeze and thaw cycles, very pourable, and a 4100 psi after just a single hour (6800 in one month.)



 

Bonding Agent J-40

Dayton Superior’s J-40 Day-Chem Ad Bond is a superior bonding agent consisting of acrylic latex emulsion. It is mainly used for bonding new to new or old to new concrete in exterior or interior applications. J-40 is extremely effective when it is used as an admixture with cementitious products such as patching compounds, coatings, and grouts. As an admixture, J-40 not only promotes a strong bond but also greatly increases the strength, durability, and resistance to moisture of the finished product. It is available in one gallon jugs and five gallon pails



 

Castings

Dalco/Teton carries a large inventory of manhole rings and covers and RL channels. The standard 24” ring and cover is in-stock along with the 5, 10 and 15 foot lengths of RL channels. Less-common sizes are available, please call for availability. Each casting can be specified for heavy to light duty, and can include wording that is called for by various DOT agencies or municipalities.

Dalco/Teton carries a large inventory of manhole rings and covers and RL channels. The standard 24” ring and cover is in-stock along with the 5, 10 and 15 foot lengths of RL channels. Less-common sizes are available, please call for availability. Each casting can be specified for heavy to light duty, and can include wording that is called for by various DOT agencies or municipalities.



 

Color Stain

QC Patina Stain penetrates and etches into new or existing concrete to color the concrete's pores. Patina stains do not "cover" the concrete, it is not a paint. The stain works in conjunction with the color tones of the substrate, providing an attractive looking finish. It is available in eight different colors, each providing a separate and distinguished look and feel. The stain will not chip, crack, fade or peel. It is available in 1, 5 and 55 gal units.



 

Concrete Curing Blanket

Why bother with the hassle of renting concrete blankets when Dalco sells them at a low cost every day? There is no time and labor spent on cleaning, refolding, and returning the blankets after just a single use. After two uses, Dalco's blankets have already paid for themselves (in comparison to renting.) All blankets are 12' x 25', available with an R value of 8.02 or 10. Each blanket is rigidly constructed to withstand the rigors of the average western winter. Ask about large quantity discounts.



 

Cure & Seal- Safe Cure & Seal J-18

Due to the fact it is devoid of noxious flammable fumes that typically emanate from solvent based cures, Safe Cure & Seal or J-18, is perfectly suited for interior applications. These properties lend to J-18 being a much safer alternative to solvent cures that emit a robust odor and are highly flammable. J-18 is a water-based styrene and acrylic copolymer that is not only a cure, but also a seal and dustproofer for newly poured concrete. Resistant to many chemicals, J-18 also works with standard carpet and tile adhesives. Available in 5 gal. or 55 gal. units.



 

Cure & Seal- J-20 UV

J-20 effectively cures, seals and dustproofs fresh interior or exterior concrete surfaces. When applied properly, J-20 forms a clear film that will resist many chemicals, assist in protecting against stains, and promotes simple removal or mortar droppings. J-20 contains 25% solids and meets ASTM C-309. It can be applied between temperatures of 90 to 35 degrees Farenheit. This particular product was reconfigurated under VOC laws to meet the current standards. Standard packaging is 5 gallon pails and 55 gallon drums.



 

Cure- Clear J-11-W

Dayton Superior J-11-W is a resin- based clear curing compounds for use on freshly finished horizontal and vertical concrete surfaces. It requires no mixing and can be applied with a low power sprayer, roller, or brush. One gallon will cover approximately 200 square feet, drying in about 2 hours. Dalco/Teton has J-11-W available in five gallon pails and 55 gallon drums. It meets the ASTM C- 309 Type I, Class B standards.



 

Cure- Davis Colorseal II for Colored Concrete

The standard gray, drab color of concrete is not exactly the most attractive shade to live with on a daily basis. Colored concrete can be used to transform ordinary concrete structures into an enhanced look that brings out the life of driveways, patios, walkways, paths or other exterior and interior applications. Dalco has in-stock, everyday, Davis Colorseal II, a curing and sealing compound for new and old colored concrete. Ordinary water-based curing compound and plastic curing sheets can discolor the slab. Davis Colorseal II will not only improve the color of the concrete, but also protect the slab to prevent cracking and promote final hardness. By applying Colorseal II every year or so on old concrete slabs, it will help renew the color appearance and continue to protect it as well. Colorseal II is semi-transparent and tinted in 40 different shades. Dalco carries the entire Davis color chart, either in-stock or just a few days away.



 

Cure- White, Wax Based

US SPEC MaxCure Wax White is a white, wax-based cure that was designed to meet or exceed VOC restrictions. It cleans up without the use of messy and costly solvents, only simple water clean-up is required. MaxCure is recommended where high reflectance of sunlight is desired for temperature reduction of concrete. It is available in 5, 55 and 275 gallon quantities.



 

Curing Blankets- UltraCure

The superior water retention ability of UltraCure-NCF allows the blanket to absorb more than 41 gallons of curing water per 1,600 sq. ft. roll, providing the critical moisture required for the long term wet curing of concrete surfaces. With typical application and proper installation, the superior absorbency demonstrated by UltraCure NCF means there's no need to re-wet the slab.



 

Curelap Curing Blanket

Curelap Blankets are a combination of 10 oz. burlap and 5 mil white opaque poly. The 5 mil polyethylene is extruded onto the 10-ounce burlap. The result is a lightweight summer curing blanket that can be used over and over again. The burlap layer distributes the water evenly over the covered surface, while the white opaque poly reflects the intense rays of the sun. The blankets are ideal for use on silica fume overlays and parking structure decks, and can be used effectively on any concrete structure



 

Epoxy Grout

Five Star DP Epoxy Grout is the only expansive, nonshrink, low exotherm epoxy system for machinery grouting. This versatile, dual-purpose product is formulated for single, large volume placements. It's a three component, 100% solids, solvent-free system formualted to provide high strength and superior creep resistance combined with the highest effective bearing area.



 

Epoxy- Resi-Bond J-58

Resi-Bond is a 100% solids, high modulus, high strength epoxy bonding adhesive. It is a two component, moisture-insensitive structural epoxy adhesive that meets ASTM C-881. It is ideal for bonding fresh concrete to hardened concrete and for bonding steel to fresh or hardened concrete and for bonding steel to fresh or hardened concrete. Resi-Bond can also be used for anchoring bolts, dowels and reinforcing steel into concrete where a pourable consistency is required.



 

Epoxy- Sure Anchor J-51

Sure-Anchor J-51 is a 100% solids, high modulus, high strength adhesive. However, J-51 is a thick, "peanut butter" consistency. It is perfectly suited for anchoring bolts, dowels, and rebar into concrete as well as vertical and horizontal structural bonding and patching. It can also be utilized to seal unsightly cracks and set injection ports. Both J-51 and J-58 are available in cartridges for easy gun application and in larger gallon units. Contact your Dalco rep to see how much of either product your specific project will require.



 

Evaporative Retarder/Finishing Aid J-74

Sure Film, or J-74, is a evaporative retardant/finishing aid for concrete. J-74 helps to create dense, high quality concrete by reducing the evaporation of moisture from the concrete surface during the finishing process. Shrinkage cracking will be reduced when J-74 is used in less than suitable conditions (i.e. hot, dry, windy, humid) because of reduction of moisture that allows more time for proper finishing. It will have no detrimental effect on strength or durability. Sure Film is equivalent to the generic term used in the industry for evaporative retarder or finishing aid, Confilm.



 

Floor Underlayment

Dayton Superior Levelayer II is a self- leveling, non-shrinking floor underlayment. It can be used on new construction projects to correct rough or unfinished concrete and to level out uneven floors. Levelayer II can cover 50 square feet at 1/8" per 50 pound bag. However, it can be applied at any thickness from a featheredge to 4". Normal foot traffic is acceptable after 3-4 hours. Use J-42 primer in conjunction with Levelayer II.



 

Foam Insulation- Pactiv Polystyrene

Amofoam (aka Pactiv GreenGuard) extruded polystyrene foam insulation board is designed to help preserve the integrity of masonry and concrete wall systems and give contractors confidence that the sidewall system will perform over the long term. Each 4' x 8' sheet's high density, closed cell structure provides inherent moisture resistance. It is designed to maintain a high R-value and compressive strength, and will not deteriorate over time, protecting the overall wall system from long-term damage. Each sheet is available in several different thicknesses, lightweight, easy to install, and available in scored style- "snapped" into three smaller portions.



 

Grout- 1107 Advantage

1107 Grout is a non-shrink, non-corrosive, non-metallic grout. It offers the advantages of pumpability and heat and thermal shock resistance, while providing a controlled, net expansion. 1107 is designed for interior and exterior grouting of precast concrete components, structural column base plates, pump and machinery bases, anchoring bolts, rebars, dowels, bearing pads, keyway joints, and crane rails.



 

Grout- Epoxy Grout by Five Star

Five Star DP Epoxy Grout is the only expansive, nonshrink, low exotherm epoxy system for machinery grouting. This versatile, dual-purpose product is formulated for single, large volume placements. It\'s a three component, 100% solids, solvent-free system formualted to provide high strength and superior creep resistance combined with the highest effective bearing area.



 

Grout- Five Star

Five Star Grout is the industry’s leading cement-based, nonmetallic, non-shrink grout for supporting machinery and equipment. It is formulated with Air Release technology that combines high performance with the greatest reliability. When tested in accordance with ASTM C 827, Five Star® Grout exhibits positive expansion. Five Star® Grout meets the performance requirements of ASTM C 1107-02 Grades A, B and C, ASTM C 1107-07, and CRD-C 621-93 specifications for non-shrink grout over a wide temperature range, 40°F - 90°F (4°C - 32°C).



 

Grout- GP Grout

Join, support and anchor. GP Grout is designed to provide high flexural and compressive strength performance from stiff to fluid consistencies. Hardens free of bleeding, segregation and shrinkage. Good performance and economical. 50 lb bags, in stock at Dalco.



 

Grout - MP Grout

US Spec MP Grout is designed to provide high flexural and compressive strength performance from damp pack to fluid consistencies. Hardens free of bleeding, segregation and shrinkage. Excellent flowability.



 

Grout- Sure Grip Dri-Pak

Sure-Grip Dri-Pak Grout is a high performance, ready-to- use, non-shrink, non-corrosive, non-mettallic grout that is specifically formulated for dry packing applications. Dri- Pak’s special formula is created to produce high density and a high compressive strength. It achieves a strength of 4,200 psi in one day, which helps speed up construction time. Dri-Pak contains no chlorides or any substance which could cause corrosion, rusting, or bleeding.



 

Grout- Sure-Grip High Performance

Sure-Grip High Performance Grout is a, non-shrink, non- corrosive, non-metallic grout that is ready-to-use. It can be used for the same applications as the 1107 grout, but but is specifically designed to deliver a high rate of flow with excellent density and a high compressive strength. Sure-Grip delivers 5,000 psi in one day and provides an effective load bearing surface through its non-shrink properties. These properties make it ideal for dynamic loads. Sure-Grip contains no chlorides or any substance which could cause corrosion, rusting, or bleeding.



 

Joint Sealant- Sonneborn NP-1

NP-1 is a one-component high- performance gun-grade moisture-curing polyurethane sealant designed for a wide range of sealing and caulking applications in active exterior joints. NP 1 requires no mixing and typically bonds to many materials without a primer, including concrete and masonry. It is available in "sausage" pro-packs 20 ounce cartridges and 10 ounce cartridges.



 

Joint Sealant- Sonneborn NP-2

NP-2 is a two-component gun-grade polyurethane sealant that produces a flexible long-lasting seal. NP 2 bonds to most common construction materials without a primer. It has been successfully tested for a joint movement of plus or minus 50% according with ASTM C 719.



 

Joint Sealant- SL-2

SL-2 is a two-component polyurethane sealant that is mixed and poured in place. When cured, it forms a tough, resilient joint seal that resists penetration, abrasion, and remains flexible through exposure to weather and aging. SL 2 is available in both self-leveling and slope-grade versions. It can be color matched to any substrate.



 

Joint Sealant Tape - Willseal

This pre-compressed, self-expanding polyurethane foam joint sealant is designed to seal against weather, moisture, vapor, sound, draft, and dust. Unlike other sealant methods, Willseal will not react to joint movements and strain, surface contamination, aging, and general tensile stress-caused failures. It will not dry out, shrink, or deteriorate over time. There is no masking, painting, mixing, nor staining. Basically, there is no mess. Contact your Dalco or Teton rep to see which type of Willseal is best for your particular application.



 

Parking Guards and Splash Blocks

Dalco provides precast parking blocks and splash blocks to help finish up the job. Heavy duty, durable concrete units are available. Parking guards come with rebar stakes for secure placement.



 

Patch- Five Star EZ Cure

Five Star EZ-Cure Repair Mortar is a fast turnaround, fiber reinforced, single component, high-performance cementitious repair mortar for horizontal or formed vertical repairs. It requires no wet cure or curing compounds and may be extended with coarse aggregate to make a fast setting concrete for deeper placements. Five Star EZ-Cure Repair Mortar is a versatile, high early strength product which provides a durable long term repair.



 

Patch- HD-50

Dayton Superior's HD-50 is a rapid-setting flowable patch, latex-modified, fiber reinforced, and fast setting. It is designed for horizontal areas where high strength and fast setting are required to minimize downtime. Areas repaired with HD-50 can be open just outside of an hour due to the compressive strength of the patch. HD-50 is ideal for the repair of highways, bridges, runways, warehouse floors, loading docks and parking structures.



 

Patch- Polyfast FS

Dayton Superior Polyfast FS is a high strength mortar containing Portland cement, special polymers and additves to provide an outstanding strength gain along with a fast set. It contains a a built-in acrylic bonding agent that helps give it a "putty-like" consistency. This property makes Polyfast FS perfect for vertical and overhead applications. One 50 pound bag results in a .42 cubic foot yield.



 

Patch- Re-Crete 20 Minute Set

Re-Crete is an easy to use patch that does not contain a bonding agent. It is an economical alternative to patching applications, whether they be vertical or overhead. Re-Crete sets fast in 15 minutes and yields 1/2 cubic foot per 50 pound bag. Simple use for step repair, quick sidewalk work, or miscellaneous work.



 

Patch- Thin Resurfacer

Dayton Superior Thin Resurfacer is the ideal patching and resurfacing compound for thin applications (feather edge to 1/2".) Ideally suited for the repair of rain damaged new concrete or badly spalled older surfaces, Thin Resurfacer requires only the addition of water. It sets faster than normal concrete, whereas the surface can be open to foot traffic in 6-7 hours.



 

Patch- 3-2-1 by US Spec

3-2-1 is designed to provide a smooth, textured patching material for thin surface repairs, coating and restoration applications. 3-2-1 exhibits superior workability by maintaining a smooth, creamy consistency for easy troweling, rubbing or spreading. 3-2-1 has superior bond strength to the substrate and contains no gypsum



 

Patch- Transpatch

Transpatch provides rapid repair of horizontal concrete surfaces. This product is designed to achieve a high early strength and is open to traffic in as little as 1 hour. Transpatch offers superior resistance to de-icing salts, petroleum products and other chemicals prevalent on concrete roadways. In addition, Transpatch will not rust or corrode reinforcing steel under moist, humid conditions. CDOT approved.



 

Silicone Sealant

Sika Silicone Sealant is a uniquely formulated low modulus sealant produced for sealing joints in portland cement concrete pavements. The sealant is supplied as a ready-to-use, one component, self-leveling or non-sag, moisture curing system which provides a lasting and flexible seal. Sika Silicone Sealant offers outstanding weathering resistance and remains flexible down to temperatures as low as -50°F. The sealant bonds strongly to portland cement joints without the use of primers. Sika Silicone Sealant is applied to pavement joints using a bulk dispensing system. Available in 52 gallon drums, 5 gallon pails, and quart tubes. CDOT and WYDOT approved.



 

Vapor Barrier- 10 mil Stego

Stego Industries Stego Wrap is a high strength vapor barrier and is in demand by contractors and engineers throughout the world. Stego Wrap goes as far to control radon gas. It is resistant to the soil's chemicals and solvents to provide a safer environment for the forthcoming building or structure. Stego's "dare to tear" mantra serves true, as the distinctive yellow colored material is impossible to rip. Now in stock is the Class A style, which is being speced more and more. Available in 14' X 110' rolls in the 10 mil style



 

Vapor Barrier - 15 mil Stego

Stego Industries 15 mil vapor barrier is the toughest vapor barrier in the industry, hands down. It exceeds every ASTM Standard that is set forth for underslab vapor barriers. Permeance, puncture resistance, tensile strength; all are set at the highest levels to provide the ultimate level of protection. Stego provides "life of the building" protection and is easy to install on the job site. While older vapor barriers bill themselves as "vapor retarders," Stego is the only true "vapor BARRIER" that provides the utmost resistance to soil chemicals and pollutants.



 

Waterproofing Damproofing- Hydrocide 600

Hydrocide 600 is cold-applied emulsified water-based asphalt dampproofing and vapor-retarding coatings used on "green" or slightly damp surfaces. Use Hydrocide 600 on interior surfaces above grade and on exterior surfaces below grade.



 

Waterproofing Masonry Coating Seal Coat

Seal Coat 1000 by Dayton Superior is a waterproof, cement base, extra stength masonry coating which halts water penetration and damage. It is available in white or gray and can be used in exterior or interior applications, above or below grade on all types of masonry. For example, use Seal Coat to waterproof a basement, water reservoirs, concrete or stucco. It provides a smooth and uniform surface to any masonry surface. Available in a 55 lb. bag.



 

Waterproofing Slurry

Vandex Super is a cementitious product providing in-depth waterproofing and protection of new or old structurally sound concrete. It is produced from rapid-hardening portland cement, specially treated quartz sand, and a compound of active chemicals. It does not provide a decorative finish. Vandex Super is fairly easy to use,simply mix with water and spray on. It will sealand post shrinkage cracks up to 3 mm. It is ideally suited for water tanks, sewer applications, swimming pools, and foundations.